ademco vista 40 manual

AWAY Key When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises. MAXIMUM When armed in MAXIMUM mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises. IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. A red and green light on the keyswitch plate indicate the status of your system as follows: Green Light: Lights when the system is disarmed and ready to be armed (no open zones). When activated, three beeps will sound at the Keypad whenever a protected perimeter door or window is opened, and the Not Ready message will be displayed. Pressing the READY key will display the open protection points. When a message is waiting to be viewed, the message shown below will appear. Press and hold down key for 5 seconds. The functions that might be programmed are Silent Emergency, Audible Emergency, Personal Emergency, and Fire. See your installer for the function(s) that may have been programmed for your system. The authority level defines the system functions that you can perform. Depending on your authority, there are certain system functions you may be prohibited from performing. There are six authority levels, each having certain system restrictions. Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level users. To Add a User G L O B A L A R M.The system will recognize that the User number is already in O K T O D E L E T E use and will prompt to confirm that it should be deleted. But, if the user is authorized, a keypad in one partition can be used to perform system functions in the other partition by using the GOTO command. Check with your installer. events. ALARM EVENT LOG. The “Ready” message should be displayed on the keypad.

• ademco vista 40 manual, ademco vista 40 programming manual, ademco vista 40 user manual, ademco vista 40 installation manual, ademco vista 40 manual, ademco vista 40 programming manual, ademco vista 40 user manual, ademco vista 40 installation manual, ademco vista 40 manual, ademco vista 40 manual, ademco vista 40 manual, ademco vista 40 programming manual, ademco vista 40 user manual.

You've made a wise decision in choosing it, for it represents the latest in security protection technology today. Ademco is the world's largest manufacturer of security systems and millions of premises are protected by Ademco systems. When the system is armed, faulting one or more protection zones causes an alarm to sound and allows the central station to listen-in to activity at the premises (if your system is so equipped). To stop the alarm sounding, simply disarm the system.The keypads feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) which shows the nature and location of all occurrences. Keypad display backlighting is programmable to always stay on or to light only IMPORTANT: If the when a key is pressed, then turn off a little later. INSTANT ALARM BYPASS INSTANT: Perimeter burglary zones armed and entry delay is turned CHECK off. Fixed-word keypads are disarmed.Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. Using the READY key will display all zones that are faulted, making it easier for you to secure any open zones. READY Key The abbreviated instructions for the READY key will appear first, followed by the zone descriptors. Bypassed zones are unprotected and will not cause an alarm when violated BYPASS Key while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed. Ask your installer if this feature is active for your system. Note: All bypasses are removed when an OFF sequence (security code plus OFF) is performed. STAY key When armed in STAY mode, the system will sound an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises. INSTANT When armed in INSTANT mode, the system will sound an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises.

Features include advanced partitioning, end-user simplicity and compatibility with the best wireless technology today. A powerful control, the VISTA-40 can support residential installations and operate lights and appliances - providing you with greater installation flexibility while offering your customers the ultimate in convenience.All rights reserved. Consider upgrading your browser to Chrome, Firefox or newer versions of Internet Explorer for the best browsing experience! You may use the product manuals only for non-commercial purposes, and you may not reproduce, duplicate, copy, sell, resell or publish any portion of the product manuals without the third party owner’s prior consent. Unauthorized use strictly prohibited. Advanced partitioning gives users the ability to program independent security areas in one set location, all from the same control panel. Its nine hardwired zones are expandable up to 64 zones, and the panel supports up to 70 user codes, 16 two-wire smoke detectors, and 16 keypads. The VISTA-40 can support residential installations and operate lights and appliances - providing you with greater installation flexibility and the ultimate in convenience.

The identification of each detector should appear on the display when each is activated. 8. After all protection points have been checked and restored, there should be no zone identification numbers displayed. Note: Messages displayed by fixed-word keypads are shown in parentheses ( ) after the alpha trouble message displays listed below. In the event of an emergency, the installed smoke and heat detectors will automatically send signals to your control, triggering a loud, “beeping” from keypads. A pulsed sound will also be produced by optional exterior sounders and by any 2-way voice keypads in your system. However, there are some things you can do to make sure that your system is in reliable working condition. To view faulted zones when system not ready. Descriptors for 5 seconds (Alpha Keypads only) Arm System Enter code. Enter partition number (1-2). FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use. The FCC requires the following statement for your information: This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. On the front cover of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. If warning devices sound on a different level of the residence from the bedrooms, then they are less likely to waken or alert people inside the bedrooms. If you can’t find what you’re looking for, click here. To learn more about Resideo, click here.